How To Make CBD Oil? [And The Brands To Try]
How to make CBD oil? Ultimately, making CBD oil at home gives you full control over what goes into your CBD products and the process to make it isn’t as daunting as it may seem.
How To Make CBD Oil: The Highlights
- CBD oil can be made using multiple different extraction techniques such as CO2 extraction, alcohol extraction and steeping in oil.
- Homemade CBD oil gives you full creative control over your CBD product, including the ability to add other botanicals of your choice.
- To make CBD oil at home, you do not need to have any sophisticated or expensive extraction facilities or machinery.
- You can use your CBD oil as a tincture, use it to make edibles or even use it in the creation of topical CBD lotions and creams.
- CBD oil can be used to treat ailments such as anxiety, depression, and sleeplessness to name a few.
Why Should You Make Your Own CBD Oil?
The cannabis industry remains heavily unregulated, especially thanks to the fact that the federal government is temperamental about its position with respect to cannabis.
While hemp-derived botanicals have been legalized at a federal level, marijuana has not, and this creates confusion and ultimately leads to an unregulated supply chain. At the very least, this is one good reason to make your own CBD oil.
You get to choose how your CBD oil is made and can ensure no industrial contaminants or pollutants end up in your product.
Making your own CBD oil also gives you the chance to play the role of the herbalist, adding whatever other botanicals to your CBD oil that you choose.
For example, if you are using CBD oil for sleep, you may even choose to infuse lavender into your CBD oil. You aren’t awarded with such liberties when you purchase ready-made CBD products.
Finally, there is a mountain of enjoyment to be experienced from making your own CBD oil.
There is a sense of self-reliance in knowing how to make the things that we take and use including CBD products and other botanical medicines.
It is extremely gratifying to participate in the manufacture of what you use, and CBD is no different!
Additionally, as long as you’re making CBD oil with less than 0.3 % THC, you are in the clear with authorities.
Different Ways Of Making CBD Oil DIY
For the most part, CBD manufacturers use a technique called CO2 extraction to produce CBD oil. It is one of the most efficient and cleanest methods of extracting cannabinoids from cannabis plant material.
However, most regular people don’t have access to a CO2 extraction device – and that’s just fine because there are many other ways to perform this task.
One very important thing to remember before making your own CBD oil at home is that you need to choose appropriate plant material.
The techniques we are about to present extract all the cannabinoids present in a cannabis specimen. That means if you choose a high-THC strain of cannabis, your oil will also contain high levels of THC.
Therefore, if you want to create something that strictly contains CBD or has a higher CBD percentage, it’s better to get high-CBD strains. You can also order CBD flower from spots like CBD Hemp Direct.
The oil method simply requires steeping your chosen botanical material inside the oil of your choice. To fully take advantage of your product, you should choose an oil that is also packed with nutritional benefits.
Using a slow cooker or double boiler, mix the cannabis and oil together then leave it on low heat for around 4 hours on slow-cooker and six hours in a double boiler. And stir often.
Additionally, you want to add water to the mixture to avoid burning. And note that the oil temperature should not be above 245°F regardless of the method you go with.
This encourages activation of THC without burning which wrecks the active ingredients. Cooking can be done in numerous ways. It can be done either via a slow cooker which should be placed on low for around 4 or more hours while you occasionally stir.
After the oil is done, let it cool before you strain it into a jar or container and store it.
The Alcohol Method
The alcohol method is much more time consuming than the oil method because it does not employ heat. Buds are simply left to steep for months in alcohol until most of the cannabinoids have been dissolved.
Heat may be applied at a later stage to reduce the alcohol and therefore potentiate the mixture, but it isn’t an entirely necessary step. If you do choose to reduce the alcohol down, you can end up with a very thick, viscous, oily mixture at the end that is more akin to CBD oil than the alcohol mixture itself.
The alcohol method is not as versatile as the oil method in terms of its application.
It is uncommon to add alcohol to cooking and is also not often an ingredient when preparing lotions or creams. For that reason, the alcohol method is good to use if you only plan on using your CBD oil as a tincture.
How To Make CBD Oil DIY Guide
Remember that what you make at home can be very different from what you would purchase from a dispensary or health food store.
This is the nature of the extraction technique you are using, but that doesn’t make your final product any less valuable. The small imperfections that arise out of your DIY technique can be worked on over time as you learn the little nuances of herbal extraction.
But if you don’t have the time or patience to perfect your CBD oil, Farma Health recommends the following CBD oils:[product-multiple product-id1=10384 product-id2=10395 product-id3=10383]
Step #1 – Prepare Your Stash
The first step to making homemade CBD oil is to decarboxylate your plant material. This means applying heat to your plant material so as to slightly change the chemical structure of the cannabinoids present.
If decarboxylation does not take place, cannabinoids will be present in their acidic forms, namely as CBDa and THCa. These cannabinoids are also extremely medicinally valuable, and it is worth doing some research about the ways these cannabinoids can assist you before deciding whether you will decarboxylate or not.
Note that THCa is not psychoactive, but is just as medically viable (if not more) than THC itself. Plus, THCa is much easier for the body to absorb than THC itself, and therefore allows greater bioavailability. These are things to consider before deciding whether you will decarboxylate your buds or not.
If you are going to decarboxylate, these are the steps:
- Preheat your oven to 240°F (115°C). It is best if you use an internal oven thermometer to measure the exact temperature inside your oven as this will prevent overdoing or underdoing your plant material.
- Line a baking tray with baking paper or parchment paper.
- Grind your buds, not into a powder, but into the same consistency that you would use to roll a joint. Spread out the buds evenly on the lined baking tray.
- Toast your cannabis in the oven for a total of 40 minutes. After 20 minutes, gently stir the cannabis in the tray so that you can toast it evenly on all sides.
- After 40 minutes, remove your buds from the oven and let them cool before using them. They should be a darker green color than when you put them in, but they should not be black.
Step #2 – Choose The Oil And Steep The Weed
When you have chosen your oil, it’s time to steep your weed. It is difficult to know the exact ratio of oil to buds because, in DIY preparation, you don’t necessarily know the exact cannabinoid content of your buds.
If you do know, it makes it easier. For example, if you have a certificate of analysis that says your buds contain 15% CBD, you know that 10 grams of CBD contains 1500mg CBD. You can then choose an appropriate volume of oil, such as 60ml.
It doesn’t matter if it’s not perfect, so long as you have a rough idea of the cannabinoid content of your plant material. And if you don’t know at all, that’s OK too – just consider this to be an experiment.
Once you have chosen your volume of oil, put it in a saucepan with your decarboxylated (or non-decarboxylated) buds. Add the exact same volume of water.
Turn the heat on very low and continue stirring your mixture. Slowly increase the heat until the temperature of your mixture reaches 200°F. You don’t want your mixture to be boiling out of control as this can denature your oil and destroy some of the precious compounds in your buds.
The point of using water in this process is essential to stop your oil from burning and to avoid this process turning into a cannabis fry-up. It also stops parts of your mixture from coagulating and forming clumps.
Cook for a total of 30 minutes, or until it looks like the majority of the water has evaporated from the mixture. Your cannabis should start floating to the top at this point. Now you can remove the mixture from the heat and let it cool down before the final step.
Step #3: Cool And Separate The CBD Oil
Once the mixture has cooled down enough for you to handle it, strain the infusion into a jar or Tupperware container using a sieve.
You don’t want any floating botanical material in your CBD oil, so strain as many times as necessary to clear the liquid from plant material. Then put the jar in the fridge for at least 2 hours, although leaving it overnight is better.
In the fridge, the mixture will cool and separate. The CBD rich oil will collect on the top and will turn into a solid, waxy material while the water will collect on the bottom. Try to separate the oil from the edge of the jar (using a knife or simply by squeezing the jar if it is plastic) and pour the water out. You are now left with your CBD oil!
How To Use Homemade CBD Oil
Now it’s time to start using your own home-made CBD oil. You can use it in multiple ways, whether you choose to consume it as it is or use it in cooking.
When your oil has cooled right down, it should assume a liquid form again. You can simply put your oil in a dropper bottle and consume it as a tincture.
Drop it under the tongue for quick absorption into the body. If you have a rough idea of the volume of cannabinoids in the mixture, you should also be able to dose accordingly. If not, you will have to start at a small dosage and move your way up until you find the perfect dose.
There are thousands of recipes online for homemade lotions and creams, and they almost always include a mixture of different oils.
Simply replace one of the oil ingredients with your homemade CBD oil and you can make a CBD rich lotion or topical treatment for the management of physical pain, muscular injuries or even arthritis.
You won’t be able to vape your homemade CBD oil right away because it probably won’t have the right consistency for vaping.
You will need to mix your CBD oil into an appropriate vape juice, or you can even make your own vape juice using vegetable glycerin and flavors. In any case, you can just drop your CBD oil into an already prepared vape juice and dissolve it, then put it straight into your vape!
Your oil can also be used to make edibles.
If you have used olive oil as your carrier oil, you can use it in a stir fry, soup or any other place you would use olive oil. If you have used fractionated coconut oil as your carrier, it is perhaps better to stick to sweet recipes which use coconut oil as an ingredient.
Your soup might not taste delicious with loads of coconut oil in it!
The Advantages Of Making Your Own CBD Oil
Making your own CBD oil at home is an extremely rewarding task. As a consumer, this will give you the ultimate creative freedom in choosing all the ingredients in your product.
It will also grant you the satisfaction of not having to rely on big companies to manufacture the products that you use every day, and this can have profound effects on the way you take or consume anything in your life.
But making your own CBD oil could also lead to inconsistencies or failed recipes. If you preferred to buy your CBD oil, the following brands will[product-multiple product-id1=10384 product-id2=10395 product-id3=10383]